Skip to main content

Introduction to reflection of light

 

OPTICS

Optics is a branch of physics which deals with the study of light and its behaviour.

Optics is subdivided into two branches:

They are:

1)    RAY OPTICS

2)    WAVE OPTICS

(Light has Dual nature. It travel in the form of a ray as well as a wave)

Light: Light is one of the forms of energy which causes a sensation of vision.

Light follows rectilinear propagation.

RECTILINEAR PROPOGATION OF LIGHT: Light always travels in straight lines. It never takes a curved path to propagate in any medium.

Example: Formation of Image by pinhole camera.

Pinhole camera

From the above diagram it is clear that a pinhole camera always forms vertically inverted, real images on the screen inside of it. This is due to rectilinear propagation of light.

What would happen if we increase the size of

the hole of the pinhole camera?. Observe the flame of

a candle with a pinhole camera making a big hole. Try

to draw a ray diagram of the formation of an image in

a pinhole camera with a big hole.

Pinhole camera 1

By observing the figure we can understand that the

light rays coming from the top of the candle flame fall at different points

on the screen. Similarly the rays coming from bottom of the candle flame

also fall at different points on the screen. Thus we get blurred image on

the screen due to the big hole of the camera.

Note: speed of light in vacuum is 3X108 m/s (metre per second).

So let us know about one of the phenomena of light in ray optics

 

REFLECTION OF LIGHT

REFLECTION: Reflection is a phenomenon of light in which, light bounces back into the same medium when it strikes a smooth surface.

Let us understand this phenomenon with an example.

Reflection on plane mirror

In the above figure, the ray falling on the smooth surface is known as incident ray, the ray coming back into the same medium after reflection is known as reflected ray and the perpendicular line drawn to the smooth surface (let us take an example as a plane mirror) is known as Normal line.

(important: the ray passing through normal to the mirror, comes back in the same path after reflection)

Angle of incidence: this is the angle between incident ray and normal

Angle of reflection: this is the angle between reflected ray and normal.

Glancing angle of incidence: this is the angle between incident ray and plane mirror.

Glancing angle of reflection: this is the angle between reflected ray and plane mirror.

 LAWS OF REFLECTION:

1st Law of reflection:  Angle of incidence is equal to angle of reflection.(i=r)

2nd Law of reflection:  Incident ray, reflected ray and normal all lie in the same plane (or in one plane).

Fermat principle: Light always chooses the path which takes least time to travel.

This is the reason why i=r


TYPES OF REFLECTION:



Regular reflection
REGULAR REFLECTION: Light undergoes regular reflection when it falls on regular surfaces (very smooth polished surfaces like mirror).

In this type of reflection we can see virtual image formed on the surface, But actually we cannot see the surface (example mirror)

IRREGULAR REFLECTION: Light undergoes irregular reflection when it falls on irregular surfaces (Rough surfaces ).


Irregular reflection

In this type of reflection we cannot see virtual images formed on the surface, But we actually see the surface. (example we can see an object in the presence of light)

Note: But in both types of reflections, Light obey the Laws of reflections.


Comments

Popular posts from this blog

Ppt

  The correct statements are:i) Low temperature at poles cause air to contract. ii) High temperatures along equator cause air to expand.When temperature decreases, air contracts and becomes denser. When temperature increases, air expands and becomes less dense from Preeti Khosla

REFRACTION THROUGH GLASS SLAB (lateral and vertical shifts)

  REFRACTION THROUGH GLASS SLAB: A thin glass slab is formed when a medium is isolated from its surroundings by two plane surfaces parallel to each other. Let us determine position and nature of the image formed when the slab is placed in front of an object.   Lateral shift:   Understanding with an Activity:   Material required: plank, chart paper, clamps, scale, pencil, thin glass slab and pins.   Procedure: Place a piece of chart (paper) on a plank. Clamp it. Place a glass slab in the middle of the paper. Draw border line along the edges of the slab by using a pencil. Remove it. You will get a figure of a rectangle. Name the vertices of the rectangle as A, B, C and D. Draw a perpendicular at a point on the longer side (AB) of the rectangle. Again keep the slab on paper such that it coincides with the sides of the rectangle ABCD. Take two pins. Stick them on the perpendicular line to AB. Take two more pins and stick them on the other side of the slab in such a ...

Working of a battery

  WORKING OF BATTERY: A battery consists of two metal plates (electrodes) and a chemical (electrolyte). The electrolyte (chemical) between the two metal plates consists of positive and negative ions which move in opposite directions The electrolyte exerts a certain force on these ions and makes them move in a specified direction. Let us call this force as a chemical force (Fc). Depending upon the nature of the chemical, positive ions move towards one of the plates and accumulate on that plate.   As a result of this accumulation of charges on this plate it becomes positively charged (called anode). Negative ions move in a direction opposite to the motion of positive ions and accumulate on the other plate. As a result of this the plate becomes negatively charged (called cathode). This accumulation of different charges on respective plates continues till both plates are sufficiently charged.          But the ions in motion experience another force , when ...