Skip to main content

Some important definitions related to heat

 

Some important definitions related to heat

Evaporation:  evaporation can be defined as it is a process in which Liquid turns to vapour at any temperature. 

Evaporation is a cooling process. Because to get evaporated the liquid takes the internal heat energy of a body on which it is present. so the body gets cooling effect.

example while using body spray we can feel the cooling effect when spray gets evaporated.

Factors affecting evaporation

Evaporation


 The rate of evaporation depends upon the following factors:

 1)   Surface area of the container 

For example let us take same quantity of Acetone or spirit in a test tube and a petri dish. Leave them for sometime exposed to air for some. After sometime we can observe that less acetone is present in petri dish when compared to test tube. This is because of more surface area of the petri dish.

 2) Wind speed 

Let us imagine that when we wash the floor with water, we will switch on the fan to make the floor dry quickly. So rate of evaporation is depending upon wind speed.

3)Temperature

 We can observe that rate of evaporation is more during hot summer days when compared to other seasons. This is because of more temperature in hot summer.

4) humidity 

 We can observe that wet washed clothes will not get dry faster when there is more humidity in atmosphere.

            

Rate of evaporation increases with increase in Surface area, Wind speed and Temperature. 

Rate of evaporation decreases with increase in humidity.

Condensation

Condensation can be defined as it is the process in which Vapour turns to liquid at any temperature 

Condensed water

 Condensation is a warming process.

We can observe small water droplets are formed on a cool drink bottle exposed to air. This is because when the surrounding air strikes the cool surface of the bottle, the heat energy transfers from air to bottle. As a result air turns to liquid and bottle gets warm.

Boiling

Boiling


Boiling is defined as it is the process in which liquid turns to vapour at constant temperature. Example, Boiling of water.

Melting

Melting can be defined as it is the process in which Solid turns to liquid at constant temperature .example melting of ice 

Melting

Dew


Dew

Dew is defined as condensed water droplets on cool surfaces. This can be observed frequently at early mornings.

Fog

Fog

Fog can be defined as it is a thick Mist formed due to the condensation of water vapour molecules on Dust particles which restricts the visibility. 

Freezing

Freezing

Freezing can be defined as it is the process in which liquid turns to solid at constant temperature. Example water kept in deep fridge turns to ice.

Why ice floats on water? 

This happens because of anomalous expansion of water. Water has its maximum density at 4 degree centigrade. 

 It starts expanding above or Below 4 degrees Centigrade of temperature. So as the temperature of ice is at 0 degrees Centigrade. 

 The volume of ice will be more when compared to the volume of water from which it is made. So when there is increase in the volume for a given Mass, it results in the loss of density. As a result ice floats on water as it is less denser when compared to the density of water.  

thank you


Comments

Popular posts from this blog

Ppt

  The correct statements are:i) Low temperature at poles cause air to contract. ii) High temperatures along equator cause air to expand.When temperature decreases, air contracts and becomes denser. When temperature increases, air expands and becomes less dense from Preeti Khosla

REFRACTION THROUGH GLASS SLAB (lateral and vertical shifts)

  REFRACTION THROUGH GLASS SLAB: A thin glass slab is formed when a medium is isolated from its surroundings by two plane surfaces parallel to each other. Let us determine position and nature of the image formed when the slab is placed in front of an object.   Lateral shift:   Understanding with an Activity:   Material required: plank, chart paper, clamps, scale, pencil, thin glass slab and pins.   Procedure: Place a piece of chart (paper) on a plank. Clamp it. Place a glass slab in the middle of the paper. Draw border line along the edges of the slab by using a pencil. Remove it. You will get a figure of a rectangle. Name the vertices of the rectangle as A, B, C and D. Draw a perpendicular at a point on the longer side (AB) of the rectangle. Again keep the slab on paper such that it coincides with the sides of the rectangle ABCD. Take two pins. Stick them on the perpendicular line to AB. Take two more pins and stick them on the other side of the slab in such a ...

Working of a battery

  WORKING OF BATTERY: A battery consists of two metal plates (electrodes) and a chemical (electrolyte). The electrolyte (chemical) between the two metal plates consists of positive and negative ions which move in opposite directions The electrolyte exerts a certain force on these ions and makes them move in a specified direction. Let us call this force as a chemical force (Fc). Depending upon the nature of the chemical, positive ions move towards one of the plates and accumulate on that plate.   As a result of this accumulation of charges on this plate it becomes positively charged (called anode). Negative ions move in a direction opposite to the motion of positive ions and accumulate on the other plate. As a result of this the plate becomes negatively charged (called cathode). This accumulation of different charges on respective plates continues till both plates are sufficiently charged.          But the ions in motion experience another force , when ...