Skip to main content

spherical mirrors and their parts and mirror formula

 

SPHERICAL MIRRORS:

Spherical mirrors are the mirrors which are a part of a spherical surface.

There are two types of spherical mirrors. They are:

Concave mirror and convex mirror.

1)    Concave mirror: this is a type of spherical mirror where its reflecting surface lies inwards of a spherical surface.

2)    Convex mirror: this is a type of spherical mirror where its reflecting surface lies outwards of spherical surface. (bulged surface)

PARTS OF SPHERICAL MIRRORS:


Concave and convex mirror diagram

Pole or Vertex (p): The midpoint on the reflecting surface is known as pole or Vertex.

Centre of curvature (C): It is a point which is exactly at the centre of the spherical surface.

Principal axis: the line passing through pole and centre of curvature is known as principal focus.

Principal Focus or Focus (F): It is a point on the principal axis where all the rays parallel to principal axis are assumed to be meeting at after reflection.

Focal length(f): the distance from pole to principal focus is known as focal length.

Radius of curvature(R): The distance from pole to centre of curvature is known as Radius of curvature.

 Note: For concave mirror we have real focus and real centre of curvature.

For convex mirror we have virtual focus and virtual centre of curvature.

 Focal length is always half of the radius of curvature f=R/2 (or) R=2f


Mirror formula is  1/f=1/u+1/v

(the above formula is applicable for all types of mirrors)

In the above formula

“f” is the focal length of mirror “u” is object distance

“v” is image distance.

 

For a plane mirror focal length and radius of curvature are assumed to be at infinity. Therefore for plane mirror the above formula can be written as 1/∞=1/u+1/v

ð 0=1/u+1/v

ð 1/u=-1/v

ð u=-v

This concludes that for a plane mirror object distance=image distance. And here “-“sign indicates opposite direction.

thank you

Comments

Popular posts from this blog

Ppt

  The correct statements are:i) Low temperature at poles cause air to contract. ii) High temperatures along equator cause air to expand.When temperature decreases, air contracts and becomes denser. When temperature increases, air expands and becomes less dense from Preeti Khosla

REFRACTION THROUGH GLASS SLAB (lateral and vertical shifts)

  REFRACTION THROUGH GLASS SLAB: A thin glass slab is formed when a medium is isolated from its surroundings by two plane surfaces parallel to each other. Let us determine position and nature of the image formed when the slab is placed in front of an object.   Lateral shift:   Understanding with an Activity:   Material required: plank, chart paper, clamps, scale, pencil, thin glass slab and pins.   Procedure: Place a piece of chart (paper) on a plank. Clamp it. Place a glass slab in the middle of the paper. Draw border line along the edges of the slab by using a pencil. Remove it. You will get a figure of a rectangle. Name the vertices of the rectangle as A, B, C and D. Draw a perpendicular at a point on the longer side (AB) of the rectangle. Again keep the slab on paper such that it coincides with the sides of the rectangle ABCD. Take two pins. Stick them on the perpendicular line to AB. Take two more pins and stick them on the other side of the slab in such a ...

Working of a battery

  WORKING OF BATTERY: A battery consists of two metal plates (electrodes) and a chemical (electrolyte). The electrolyte (chemical) between the two metal plates consists of positive and negative ions which move in opposite directions The electrolyte exerts a certain force on these ions and makes them move in a specified direction. Let us call this force as a chemical force (Fc). Depending upon the nature of the chemical, positive ions move towards one of the plates and accumulate on that plate.   As a result of this accumulation of charges on this plate it becomes positively charged (called anode). Negative ions move in a direction opposite to the motion of positive ions and accumulate on the other plate. As a result of this the plate becomes negatively charged (called cathode). This accumulation of different charges on respective plates continues till both plates are sufficiently charged.          But the ions in motion experience another force , when ...